-Derwent Uniflood 500
The Uniflood 500 is the high power solution to nighttime illumination for CCTV schemes.
Smaller, lighter and more efficient, this high-power illumination system can be used for scenes up to 250m (820ft).
High efficiency infrared radiation is achieved with gold optics and a matched quartz halogen bulb source to reduce power consumption and prolong average bulb life.
The lens and filter of the Uniflood 500 can be replaced if either of them are damaged:
[see ]
-Derwent Uniflood 500 - Specifications
Spectral emmision
730nm, 850nm or 950nm
Scene coverage
100m to 250m
Beam angle
6° (spot), 10°, 30° and 60° (flood)
Supply Voltage
Via Derwent power supply series PSU3SS and PSU3ST
Maximum output
Power is set to 6.4A which normally equates to a regulated output of 16.1 - 16.3VDC
Power consumption at nominal voltage
Approximately 220W
Twilight switch
Included in PSU. The light sensor is adjustable.
Cable length
4m
Ingress protection rating
IP66
Housing
Aluminium
Colour
Black
Dimensions - Illuminator (H x W x D)
130mm x 134.5mm x 212mm (See drawings below)
Weight - Illuminator
1.9kg
Dimensions - PSU (H x W x D)
250mm x 160mm x 95mm
Weight - PSU
PSU5SS 3.4 kg, PSU5ST 4.2 kg
-Derwent Uniflood 500 - Technical Drawing
All dimensions in mm
Request Information:
Uniflood 500 "Technical Data Sheet", 1.356 MB pdf file.
To view the .pdf file, you will need the free Adobe® Acrobat® Reader or plug-in. If you do not have Acrobat Reader, please select the "Get Acrobat Reader" icon for further instructions.
Uniflood 500 "Technical Data Sheet", 1.356 MB pdf file. 